Perpustakaan Fakultas Teknik

Universitas Mataram

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Area Anggota
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir Mesin

PENGARUH VARIASI DIAMETER TABUNG UDARA TERHADAP UNJUK KERJA POMPA HIDRAM

Made Yogi Permana - Nama Orang;

The need for water is indispensable for all living things. This is because water is the source of life for the survival of all living beings. For some people to meet the demand for water becomes a problem. For the people who lived on the water source. To overcome these problems required a mechanical equipment that is pump. The hydraulic ram pump was considered quite appropriate to deal with these problems, because several advantages when compared to other types of pumps, which do not require electricity or fuel, the cost of manufacture and maintenance is relatively inexpensive and easy enough manufacturing. In this study will try to develop further by varying the diameter hydraulic ram air tubes with high water output and input mounting position - the waste valve - tube compressor (ILK). In this study used a variation of the air tube diameter of 1.5 inch, 2 inch, 2.5 inch and 3-inch high air tube 30 cm high while the output of water 3 meters, 4 meters, 5 meters and the mounting position input - waste valve - tube compressor (ILK). From this research showed that most large output discharge is at high output 3 meters in diameter air tube 3 inch is equal to 0,066 liters / s. Head highest maximum was obtained on the use of air 3 inch diameter tube that is equal to 10.55 meters. The greatest efficiency with the use of 3-inch diameter tube at high output 3-meter is equal to 23.02%.
Key words: Hydraulic ram, output, maximum head, efficiency, air tube


Ketersediaan

Tidak ada salinan data

Informasi Detail
Judul Seri
-
No. Panggil
621.2 [21]Ima.p
Penerbit
Universitas Mataram : Fakultas Teknik Unram., 2016
Deskripsi Fisik
-
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
621.2 [21]
Tipe Isi
-
Tipe Media
-
Tipe Pembawa
-
Edisi
Edisi 1 Jilid 1
Subjek
POMPA HIDRAM
Hydraulic ram
maximum head
air tube
Info Detail Spesifik
-
Pernyataan Tanggungjawab
Yogi Permana,Made
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • PENGARUH VARIASI DIAMETER TABUNG UDARA TERHADAP UNJUK KERJA POMPA HIDRAM
Komentar

Anda harus login sebelum memberikan komentar

Perpustakaan Fakultas Teknik
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

Ruang Baca Fakultas Teknik

Kami menyedian Buku ajar ilmu teknik dan Tugas Akhir mahaiswa Fakultas Teknik Universitas Mataram

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2025 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik