Perpustakaan Fakultas Teknik

Universitas Mataram

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Area Anggota
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
Image of VARIASI LAMA PERENDAMAN PERLAKUAN ALKALI DAN PANJANG SERAT TERHADAP UJI TARIK DAN BENDING PADA KOMPOSIT SERAT TANGKAI AGEL DAN FILLER TEMPURUNG KELAPA BERMATRIK POLYSTER

Text

VARIASI LAMA PERENDAMAN PERLAKUAN ALKALI DAN PANJANG SERAT TERHADAP UJI TARIK DAN BENDING PADA KOMPOSIT SERAT TANGKAI AGEL DAN FILLER TEMPURUNG KELAPA BERMATRIK POLYSTER

Lalu Heri Susandi - Nama Orang;

Along with the development of the manufacturing industry, the use of composite materials that are environmentally friendly and recyclable are the demands of today’s technology. Composite material with filler material either in the form of natural fiber and artificial fiber is one of the composite materials expected in the industrial world. This study aims to find out how the value of tensile strength and bending strength on the variation of alkali tratment and fiber length to the mechanical properties of polyamide unsaturated polyester (UPR) composite fiber composites. This research was conducted by experiment. In the manufacture of specimens for tensile and bending tests the experimental design used were factorial design (3 different immersion times (hours), 3 variations for fiber length and 3 repetitions). While the data analysis used to test the hypothesis is a two way analysis of variance (Two ways anova). At this tensile strength, the highest composite tensile strength was obtained at 20 mm length with 2 hours immersion time is 21,17 Mpa, and the lowest tensile strength was 12,5 Mpa at 40 mm fiber length with 6 hours of soaking time. While the bending strength of the highest bending strength value on the immersion time of 4 hours with 20 mm fiber length is 31,5 Mpa, and the lowest bending strength is 21,8 Mpa on the immersion time of 2 hours with a fiber length of 20 mm.


Ketersediaan

Tidak ada salinan data

Informasi Detail
Judul Seri
-
No. Panggil
633.65.Lal.v
Penerbit
UNRAM : Fakultas Teknik Unram., 2018
Deskripsi Fisik
xii,52 hlm; Illus; 21x29 cm
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
633.65
Tipe Isi
other
Tipe Media
other
Tipe Pembawa
-
Edisi
Edisi 1 Jilid 1
Subjek
KOMPOSIT SERAT
Fibrous Composite
Tensile Streng Bending Streng
Info Detail Spesifik
-
Pernyataan Tanggungjawab
Lalu Heri Susandi
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • VARIASI LAMA PERENDAMAN PERLAKUAN ALKALI DAN PANJANG SERAT TERHADAP UJI TARIK DAN BENDING PADA KOMPOSIT SERAT TANGKAI AGEL DAN FILLER TEMPURUNG KELAPA BERMATRIK POLYSTER
Komentar

Anda harus login sebelum memberikan komentar

Perpustakaan Fakultas Teknik
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

Ruang Baca Fakultas Teknik

Kami menyedian Buku ajar ilmu teknik dan Tugas Akhir mahaiswa Fakultas Teknik Universitas Mataram

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2025 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik